FAAC 415 Electromechanical Swing Gate Operator – 230V

The FAAC 415 is an electromechanical operator designed for automating
swing-leaf gates. It features an in-axis thrust design for smooth and
precise gate movement and is available with different rod stroke options
to accommodate various gate sizes.

The FAAC 415 range is available with 300 mm and 400 mm rod strokes.
Depending on the version and installation requirements, it can be used
for single gate leaves up to 3 metres, or up to 4 metres with an
electric lock.

Designed for dependable swing-gate automation, the FAAC 415 provides
controlled and precise movement. The system can support functions such
as automatic re-closing and pedestrian opening when used with suitable
electronic control equipment.

The horizontal cable exit allows the operator to be installed close to
the ground, making the FAAC 415 suitable for installations where a
lower mounting position is preferred.

In the event of a power failure, the key-operated release mechanism
allows the gate to be opened manually.

• Power Supply: 220–240V AC, 50/60 Hz
• Motor: Asynchronous single-phase motor
• Maximum Power: 300 W
• Maximum Thrust: 3000 N
• Rod Stroke: 300 mm / 400 mm
• Maximum Opening Angle: 110°
• Maximum Leaf Width: Up to 3 m, or 4 m with electric lock depending on version
• Operating Temperature: -20°C to +55°C
• Protection Class: IP54
• Use Frequency: S3 – 30% for 230V version

The FAAC 415 is suitable for residential and commercial swing-gate
installations where reliable automatic gate operation is required.